SOSA · The Founder Diaries · Designer Handover
The hardware is the easy part.
Hand over the file as well.
Most fragrance systems that fail did not fail. They were handed over without the pages that make them usable: the device was specified, bought, placed and switched on, and the owner was left holding a machine, a bottle and an app. What follows is the handover I would want if the house were mine, and none of it is difficult to produce.
A specification that cannot be maintained by whoever happens to be in the house on a Tuesday is not finished. Write it so that it can be.

One of the SOSA guides for the trade. For the consumption column the owner fills in, read how to calculate running cost from measured oil use, and for the refill itself, choose and replace the correct diffuser refill.
The answer in 30 seconds
A complete handover, in eight parts
- A measured zone plan. Internal area × ceiling height per zone, in cubic metres, with the doors that make two spaces one marked as the household actually uses them.
- One device named per zone. पवन Pawan for an enclosed room up to about 500 sq ft; वायु Vaayu assessed against its published 1,000 m³ for a suitable connected zone.
- Power and clearance notes. The socket for each device, in a suitable dry position, with the clearances that model states, and the circuit noted.
- The selected oil, by model. The refill listed as compatible on the product page for the model installed, with the link. Never one bottle specified across two models.
- Tested settings, with the condition. What you set, in which zone, on which days, and the state of the doors and air conditioning when you tested it.
- A consumption log the owner fills in. Blank columns and a method. Not a figure from you, and not one from me.
- Care, refill and support instructions. How a refill is changed on that model, where the manual lives, and one route for questions.
- What the system does not do. No automatic restart, no backup power, no control from outside the home. Written down, the limits disappoint nobody later.
Why the file matters more than the machine
A fragrance system is the only part of an interior that consumes something and asks for a decision every few weeks. A light fitting is finished when it is commissioned; a sofa needs nothing from its owner but use. A diffuser hands over a running process: a schedule somebody may want to change in winter, a setting judged in one condition and lived in under another, a bottle that will one day be empty and must be replaced with the right one for that model. Processes need documents, and the document is the part most often missing. The owners who write to ask what their machine is set to, which oil is in it or where the manual went are rarely asking about a product; they are asking for a page nobody wrote. Eight short sections, produced as you go, make the difference between a system a household can keep and an appliance they quietly stop using.
Begin with the zone plan, because every later decision rests on it. For each space you intend to scent, record the internal floor area and the ceiling height, and give the volume in cubic metres. Use internal area, not super or saleable area, which include walls, shafts and a share of common space; a terrace is not enclosed air at all. Then mark which spaces are genuinely one volume, on the client's own habits rather than on the openness of your drawing: a dining area running into a hall nobody closes is one zone, a bedroom shut every night is another, and an open stair joins two floors into something larger and harder to predict. The arithmetic is set out in sizing by volume and airflow.
Then name one device per zone, and be willing to write the unwelcome line. पवन Pawan is published for one room up to about 500 sq ft and needs a suitable dry socket position and nothing else. वायु Vaayu is published for up to 1,000 m³ of a suitable connected zone and comes with a power adapter. A zone with no suitable position for the chosen model does not get a device, and the schedule should say so plainly rather than leave an optimistic gap for someone else to fill in on site.
Power and clearance come next, and they belong on the electrical drawing rather than in an email. Give the socket position for each device, in a suitable dry location, with the clearances the manufacturer states for that model, and note which circuit it sits on — including whether that circuit is on backup supply, if the home has an inverter or a generator. Any new socket is work for a qualified electrician. Planning scenting points without compromising the interior deals with the aesthetics of the same decision.
Oil is where specifications most often go wrong, and the error is always the same: one bottle written against two different machines because both are waterless. Do not do it. Name the refill listed as compatible on the product page for the model you have installed, put the link in the file, and record the date you selected it, because the oil sets offered with a product can change. If the client chose the composition, write down which one and when, so that the next person to buy a bottle is not guessing at a preference.
Tested settings are the part that separates a specification from a wish. Commission each zone in the finished room, at the lowest setting that reads at the door, with the air conditioning running as the client will actually run it and the doors as they will actually be. Then record not only the setting but the condition, because an intensity judged in a sealed, cooled room in May behaves differently with the windows open. Note the timer windows and the days you set them for. Setting a comfortable strength and adjusting as windows, AC and occupancy change are the two guides to leave with the file.
The consumption log is the section I feel strongest about, because it is the one place a designer is tempted to be helpful and should not be. Nobody can tell the owner how long a bottle will last in their home: it depends on the model, the setting, the schedule and the room, and a figure quoted from anywhere, mine included, is a guess dressed as a fact. Hand over a blank log and the method instead: date, zone, device, setting, hours run per day, the date a bottle was opened and the date it was replaced. After a few weeks the running-cost method turns the owner's own figures into a number they can plan with.
Close with care and support. Set out how a refill is changed on that specific model and what to wipe and when, from the manufacturer's instructions rather than from habit; leave the manual with the owner rather than in your site file; and give one route for questions. Then run the power-interruption test in front of the owner — off at the socket inside a scheduled window, on again — and write down what the unit did, because nothing is claimed on the subject and the authority is the manual and that test. Controls, local timers and restart behaviour is the page to attach.
What does not belong in the file
Specify only what the manufacturer states. Do not write automatic restart, resumption after a cut, backup power or control from outside the home: the SOSA app works over Bluetooth, within range, inside the house, and neither device holds a battery. Do not write a refill interval or a millilitre figure. Do not write that a device will handle a volume you have not measured. And do not let fragrance appear on the drawings as the answer to a smell with a cause — an undersized kitchen extract, a dry trap, damp in an external wall. Bathroom odour and fragrance after a renovation explain why those belong to the mechanical and civil drawings.
| The handover schedule, line by line | |
|---|---|
| Zone | The name the household uses, not the name on the drawing. |
| Volume | Internal area × ceiling height, in cubic metres. Double-height sections drawn, not averaged. |
| Device | The model named per zone, assessed against its published figure. A zone with no suitable position is recorded as having none. |
| Socket and clearance | Position, circuit, whether it is on backup supply, and the clearances stated for that model. |
| Oil | The refill listed as compatible with that model, with the link and the date selected. |
| Tested setting | Intensity, timer windows and days, the condition you tested in, and the date. |
| Consumption log | Blank columns: date, zone, device, setting, hours per day, bottle opened, bottle replaced. |
| Care | Refill changeover for that model, what to wipe and when, from the manufacturer's instructions. |
| Limits | No automatic restart, no backup power, no internet control; the app is Bluetooth within range. What the unit did in the power test. |
| Support | The manual, handed to the owner, and one route for questions. |
“Specify only what the manufacturer states, test what you specify, and hand over the test.”
For your interior designer: the handover sequence
In order, so that nothing is bought before the decision that governs it. Six steps, none of them longer than an hour, and the last one is the one that gets forgotten.
- Sign off the zone plan with the client. In cubic metres, on the client's own door habit, before a single device is ordered.
- Fix the socket positions on the electrical drawing. A suitable dry position per zone, with the clearances stated for the chosen model, and the circuit noted. New work is for a qualified electrician.
- Buy the device and the compatible refill together, per model. From the product page for that model, with the link recorded in the file.
- Commission at the lowest setting that reads at the door. In the finished room, with the air conditioning as the client will run it, and write down the condition you tested in.
- Run the power-interruption test in front of the owner. Off at the socket inside a scheduled window, on again, and record what the unit did.
- Hand over the file, the manual and the blank log. With the refill link, the care instructions for that model, the limits written plainly, and one route for questions.
वायु and पवन · local controls
What goes on the schedule, as published
वायु Vaayu: SOSA app over Bluetooth and onboard buttons · run windows on a timer, on chosen days · key-lock · power adapter included · published for up to 1,000 m³ of a suitable connected zone.
पवन Pawan: SOSA app and timer · plugs straight into the wall socket with no cable, adapter or battery · one room up to about 500 sq ft · silent.
Current prices and oil sets are on each product page.
See वायु VaayuSee पवन PawanQuestions, answered
What should an interior designer hand over with a fragrance system?
Can I put an expected refill interval in the handover file?
Can I specify one oil across both devices to simplify the schedule?
The client wants to control the system while they are abroad. What do I tell them?
Do I need to test each unit before handover?
Continue in the SOSA guides
If you would rather ask a person
Send us the zone plan
The zones you intend to scent, their internal dimensions and ceiling heights, and the controls the household needs. We will tell you which device suits each zone, which refill is listed for it, and where we think the specification is asking for more than the products do.
Write to SOSA on WhatsApp