SOSA · The Founder Diaries · Living With It
I cannot tell you what it costs.
You can measure it in a fortnight.
This is the question I am asked most often and answer least willingly, because every honest answer to it is yours rather than mine. Consumption depends on your model, your setting, your schedule and your rooms. What I can give you is a method that produces your own figure, and a warning about anybody who gives you theirs.
Any number quoted to you for monthly oil use was measured in somebody else's house, on somebody else's schedule. Measure yours. It takes a fortnight and a kitchen scale.

One of the SOSA guides to living with a device. When the figure is in hand, read how to choose and replace the correct refill, and if the number came out higher than you expected, how to set a comfortable strength is usually where the saving is.
The answer in 30 seconds
Weigh, wait a fortnight, weigh again
- Nobody can quote you a monthly figure. Not your supplier, not a review, not me. Consumption follows the model, the setting, the schedule and the room, and all four of those are yours.
- Measure a fraction of a bottle, not millilitres. A kitchen scale and a fortnight of your ordinary schedule will tell you what share of one bottle your house actually uses.
- Keep the schedule still while you measure. Do not change the setting, the windows or the position during the measuring period, or the figure measures nothing.
- Separate operating time from clock time. A timer window is a period during which the machine is permitted to run. What it does inside that window is set by your model, so read its manual.
- Then multiply by the price on the page. Take the refill price from the product page on the day you order. That is the only price figure in this calculation, and it is never one I will print here.
Why I will not give you a number
Because the number does not exist independently of your house, and quoting one would be the most useful dishonest thing I could do. Oil use follows the intensity you have chosen, how many windows run and for how long, how many days a week the house is occupied, the volume of the space, how much of it is open to other spaces, how hard the air conditioning is working and which family the oil belongs to. Change the setting by one step and the figure moves. Shut a door that used to stand open and it moves again. Go away for a fortnight in May and the month's figure is meaningless. Two households with the same machine and the same oil can land on figures that are nowhere near each other without either of them doing a single thing wrong. So rather than a figure, here is the arithmetic, which is short, and the measurement, which is one fortnight of doing nothing differently.
The measurement, in four moves
First, find the weight of a whole bottle's contents, because that is the quantity you will later be paying for. Weigh a new, unopened refill on a kitchen scale and write the figure down. Keep that bottle until it is genuinely empty, weigh it again, and the difference between the two is the net weight of one bottle's worth of oil. Call that C. You only ever have to do this once per size you buy, and doing it in weight rather than in millilitres spares you every argument about density, meniscus and what a half-full bottle looks like from the side.
Second, start the clock properly. Fit the bottle you are going to measure, weigh it in place or weigh it immediately before fitting, and record four things in the same note: the weight, call it W1, the date, the intensity setting, and the timer windows exactly as you have set them, including which days they run on. That note is the whole value of the exercise. A measurement without the setting written beside it tells you nothing you can reuse.
Third, change nothing for a fortnight. Not the setting, not the window length, not the position, not the door you leave open. A fortnight is the shortest period I would trust, because it contains two weekends and most households run differently on a Sunday, and if your occupancy swings seasonally then measure again in the other season rather than assuming. Fourth, at the end of the period, weigh the bottle again. That is W2, and the number of days you ran is D. You now have everything.
| Your own worksheet | |
|---|---|
| C | Net weight of one full bottle's contents. A new bottle weighed, minus the same bottle weighed empty. Once per size. |
| W1 | Weight of the bottle at the start of the measuring period, with the date, the setting and the windows written beside it. |
| W2 | Weight of the same bottle at the end, having changed nothing in between. |
| D | Days the machine actually ran your schedule. Subtract the days the house was empty or the device was off. |
| (W1 − W2) ÷ C | The share of one bottle your house used in that period. This is your figure, and it belongs to that setting and that schedule only. |
| ÷ D × 30 | Your share of a bottle per month at this setting. Multiply by the refill price shown on the product page on the day you order to get a monthly cost. |
Written out: subtract W2 from W1 to get the weight you used; divide by C to express it as a share of one bottle; divide by D for a daily share; multiply by thirty for a monthly share; and multiply that by whatever the refill costs on its product page on the day you order it. Every one of those five numbers is yours except the last, and the last is the only one I decline to print, because prices change and a page that quoted one would mislead somebody next quarter. If you would rather think in operating hours than in days, divide the weight you used by the operating hours you can account for from your own timer settings, and keep in mind that a timer window is a period during which the machine is permitted to run rather than a guarantee of continuous output: what happens inside the window is a property of your model, so read its manual and test your own unit rather than taking a ratio from an article, mine included.
“Every figure in this calculation is yours except the price, and the price is the only one I will not print.”
What moves the number, in rough order
The intensity setting moves it most, which is why the first thing to do with an uncomfortable running cost is to go back to the lowest step and run a shorter window rather than to shop for a cheaper oil. Window length and frequency come next, and are the easiest saving in the whole category: two short windows ending just before the rooms are used will generally give a household the scent it wanted at a fraction of continuous running, because what people enjoy is the trace rather than the production. Then volume, since a larger connected space asks for more than a single shut room does. Then occupancy: a timer window that runs while the flat is empty is the purest waste in this business, and if your home is used intermittently, there is a guide for that. Then the family, because the heavier directions tend to be run lower, which cuts both ways. Season and air conditioning sit underneath all of it, and are the reason I ask people to measure twice a year rather than once.
Two things that do not move the number, and are worth knowing before you budget for them. Neither machine holds a battery, and the app connects over Bluetooth within range inside the home rather than over the internet, so there is no standby service, no remote session and nothing of that sort to account for: the machine runs when there is mains power at the socket and your timer says so. And once you have your own share-of-a-bottle figure, choosing a refill size becomes arithmetic rather than guesswork. Decide how often you are willing to reorder, multiply your monthly share by that many months, and buy the listed size that covers it. Where a model's page lists more than one size, that is the decision the sizes exist for.
For your interior designer: budgeting a scheme honestly
Clients ask for a running cost at the proposal stage, before a single machine has been switched on, and the temptation to supply a confident figure is considerable. Resist it; a measured figure handed over in month two is worth more than a guess in week one, and it will not be held against you later.
- Quote the method, not a monthly figure. Write into the proposal that oil use will be measured on site over a fortnight at the approved setting, and budgeted from that.
- Record the approved setting as a specification item. Intensity, window length and days, per zone, with the date. The running cost is a property of that setting, not of the machine.
- Measure each zone separately. A shut study and an open living volume will not share a figure. One bottle, one zone, one note.
- Hand over the worksheet, not just the total. C, W1, W2 and D, with the setting beside them, so the household can repeat the measurement when the schedule changes.
- Re-measure after any change. A new setting, a new door habit, a new season or a second machine makes the old figure historic. Say so in the handover note.
वायु and पवन · local controls
Local timers, so the running cost is a decision
वायु Vaayu: SOSA app over Bluetooth and onboard buttons · run windows on a timer, on chosen days · key-lock · power adapter included · published for up to 1,000 m³ of a suitable connected zone.
पवन Pawan: SOSA app and timer · plugs straight into the wall socket with no cable, adapter or battery · one room up to about 500 sq ft · silent.
Current prices and oil sets are on each product page.
See वायु VaayuSee पवन PawanQuestions, answered
How much oil will my diffuser use each month?
Why will you not just publish a consumption figure?
Is a timer window the same as running time?
Can I measure in millilitres instead of weight?
Which refill size should I buy?
Continue in the SOSA guides
If you would rather ask a person
Send us your fortnight
Give us C, W1, W2 and D, with the setting and the windows you ran, and we will check the arithmetic with you and say which listed refill size suits the figure you have measured.
Write to SOSA on WhatsApp