SOSA · The Founder Diaries · For Interior Designers
If they have to move something, they stop.
Maintenance is a design decision. A device that cannot be reached, opened and refilled without relocating an object gets refilled twice and then abandoned — and the specification dies quietly, months after handover.
Placement guidance usually stops at airflow. The reason specified systems fail is almost never airflow — it is that nobody designed the thirty seconds in which a person has to open a tank and pour.

The answer in 30 seconds
Planning Diffusers with Sockets, Joinery and Refill Access
- In one line. Specify a socket at the device position, a surface deep enough to take the unit without overhang, clearance above the tank, and a home for the refill bottle within reach.₹12,499
- Socket. At the position, not across the room. A visible cable on a finished wall is the commonest reason a client relocates the device to somewhere worse.
- Surface. Deep enough that the unit sits fully supported, with space to set the bottle down beside it while pouring.
- Headroom. The tank opens upward. A device slotted under a floating shelf cannot be filled in place.
- Storage. A drawer or cupboard in the same room for the refill bottle. If it lives in another room, refilling stops.
- Never enclose it. A nebuliser needs air around it, so a closed cabinet defeats the function entirely.
The answer, in full
There is a failure mode in specified home fragrance that has nothing to do with the product or the plan, and it accounts for most of the systems I see sitting unused in otherwise beautiful homes. The device was placed somewhere correct for airflow and impossible for a human. It sits on a narrow ledge with a sculpture in front of it, or under a floating shelf with four inches of headroom, or inside a cabinet with a door that has to be held open, or in a position where the cable runs across a finished wall so the client moved it to the sideboard by the air-conditioning return. Each of these is a joinery decision made before anybody thought about the refill. And refilling is not an occasional event; it is the thing that keeps the system alive. If it requires relocating an object, crouching, or fetching a bottle from another room, it gets done twice and then stops, and six months later the client concludes that home fragrance is a lot of effort. So design the thirty seconds. Someone walks up to the device standing, reaches it at a comfortable height, sets a bottle on the surface beside it, opens the tank upward, pours, closes it, and puts the bottle back in a drawer within arm's reach. Every one of those actions implies a dimension, and all of them are free to specify while the joinery is still on the drawing. Start with the socket, because this is the one that cannot be fixed later without a visible chase or a trailing cable. Put a point at the device position itself, at a height that disappears behind the unit or the furniture rather than above the surface. Then the surface: deep enough that the device is fully supported with no overhang, and wide enough that a refill bottle can stand next to it during the pour — a 200 mm floating shelf fails both tests. Then headroom, which is the one designers most often miss, because the tank opens from the top. A device tucked into a 200 mm gap beneath a shelf has to be lifted out to be filled, and lifting a unit with oil in it is exactly the sort of small inconvenience that ends a routine. Then storage, which sounds trivial and is not: a small drawer or cupboard in the same room for the refill bottle turns refilling into a single motion. Finally, resist the instinct to integrate it into closed joinery. A nebuliser atomises oil into the air around it and needs that air to be moving; an enclosed cabinet, a slot behind a panel or a recess with a door turns the device into an expensive scented drawer. Discreet is achievable, as an open niche or a composed position — hidden is not. A portion of every SOSA order supports girl-child education through Nanhi Kali.
What to specify, item by item
The socket
A dedicated point at the device position, placed so the cable is concealed by the unit or the furniture rather than crossing a visible face. On a console or sideboard, a point at skirting level directly behind works well. Avoid sharing a switched circuit the client turns off at the wall, or the schedule is lost each time.
The surface
Deep enough for the device to sit fully supported with no overhang, and with usable space beside it for a bottle during the pour. Specify the depth as a dimension on the joinery drawing rather than assuming a standard shelf will do.
The headroom
Clear space above the device so the tank can be opened and filled in position. If the position sits under a shelf or in a niche, dimension the vertical clearance explicitly. Nobody should have to lift a filled unit out to service it.
The refill home
A drawer, cupboard or closed shelf in the same room, ideally within arm's reach of the device. Refill bottles that live in a utility room or a high kitchen cupboard do not get used, and the client experiences that as the product being inconvenient.
What not to do
No closed cabinets, no slot details behind panels, no deep recesses with doors, no positions behind a sofa back. All of them trap the output within inches of the machine and none of them can be corrected without redoing joinery.

Positions that work, and positions that fail
| Position | Verdict |
|---|---|
| Console or sideboard, inner wall, socket behind at skirting level | The default good answer. Standing access, space for the bottle, clearance above, cable concealed. |
| Open niche in joinery, generously dimensioned | Works, and reads as intentional. Dimension the vertical clearance and keep the front fully open. |
| Dedicated low plinth or pedestal | Works in minimal schemes. Check the height sits in the 90–120 cm band rather than at floor level. |
| Under a floating shelf with 200 mm headroom | Fails. The tank opens upward and the unit has to be lifted out to fill. |
| Inside a closed cabinet or behind a panel | Fails. Enclosure traps the output at the source, whatever the machine is rated for. |
| Narrow ledge with objects in front | Fails in practice. Anything the client must move to reach the device ends the refill routine. |
| Across the room from the nearest socket | Fails. The cable gets noticed and the device gets relocated — usually to somewhere worse. |
“Discreet is achievable. Hidden is not — the machine needs the air it is hidden from.”
On the joinery drawing
- Mark the device position and tag a dedicated socket behind it.
- Dimension the surface depth and the clear width beside the unit.
- Dimension the vertical clearance above the tank.
- Allocate a drawer or cupboard in the same room for refills.
- Confirm the position is not on a wall switch the client turns off.
- Note that the position must stay open-fronted — no door, no panel, no recess with a cover.
SOSA for interior designers
Design the refill, not just the position
Four dimensions on a joinery drawing are the difference between a system still running in year three and one abandoned by March.
SOSA Pawan ₹6,999 · SOSA Vaayu ₹12,499, ₹12,999 hotel-inspired · waterless refill oils ₹1,049 for 100 g, ₹1,849 for 300 g
View SOSA VaayuView SOSA PawanQuestions, answered
What should I specify for a home diffuser during a fit-out?
Can a diffuser be built into joinery?
Why do specified fragrance systems stop being used?
Where should the socket go?
How much headroom does a diffuser need?
Should refills be stored near the device?
If you would rather ask a person
Send the joinery elevation
Mark the intended device position and I will confirm the depth, the clearance and the socket location before anything is made. A portion of every SOSA order supports girl-child education through Nanhi Kali.
Write to SOSA on WhatsApp