SOSA Vaayu waterless diffuser shown open with its refillable tank

A Fragrance-Zoning Plan for Large Apartments and Penthouses

SOSA · The Founder Diaries · For Interior Designers

A fragrance plan is a drawing.

Not a shopping list and not a mood board. Three layers on the plan — connected zones, closed rooms, levels — plus a one-page handover sheet, and the client can actually run what you specified.

Most fragrance recommendations reach a client as a product name and a price, which puts the whole burden of layout, placement and scheduling on someone who has never thought about air movement. A zoned plan moves that work back into the design, where it costs almost nothing.

SOSA Vaayu waterless diffuser shown open with its refillable tank
SOSA Vaayu, ₹12,499. Published for up to 1,000 m³ of a suitable connected zone — the figure a zoning plan exists to establish.

View SOSA Vaayu →

The answer in 30 seconds

A Fragrance-Zoning Plan for Large Apartments and Penthouses

  • In one line. Mark connected zones with their cubic volumes, mark closed rooms separately, treat each level as its own sheet, then specify one machine per zone — not per room.₹12,499
  • Layer one — connected zones. Group rooms joined by doorless openings of about five or six feet or more. Annotate the combined volume in cubic metres.
  • Layer two — closed rooms. Anything behind a door the client actually shuts is independent. Mark which are occupied daily and which are not.
  • Layer three — levels. A staircase void moves air upward, so the upper level is supplied from below. Draw levels separately and note the direction of flow.
  • Mark the exclusions on the drawing: kitchen, bathrooms, utility, terraces, stairwell. A plan that says where nothing goes is more useful than one that does not.
  • Specify a socket and a surface at every device position while the electrical layout is still open.

Ask SOSA to review a client plan →

The method

Fragrance distributes through air, and air moves through openings, which means a fragrance plan is governed by the same information you already have on a general arrangement drawing — it just needs reading differently. Room labels are irrelevant to it. What matters is which spaces exchange air freely, which are isolated, and what the cubic volume of each resulting group is. That is why this is a zoning exercise rather than a product selection, and why doing it on the drawing is so much more reliable than doing it in the room on handover day. Start with layer one. Walk the plan and mark every internal opening with its width, then group rooms joined by doorless openings of roughly five or six feet or more; above that width, air exchange is fast enough that the spaces behave as a single volume. Annotate each group with its combined floor area multiplied by the finished ceiling height, in cubic metres, because every published coverage figure is cubic and almost every client conversation is in square feet. This single annotation prevents the most common specification error in the field, which is sizing to the room the designer was standing in rather than to the zone. Layer two is the closed rooms. Any space behind a door the client genuinely shuts is an independent volume and cannot be served by the zone machine, no matter how generous its rating; air does not pass a shut door. Mark these separately and add a note on occupancy, because a guest bedroom used four nights a month does not warrant a device and a master bedroom does. This is where you save your client money, and clients notice. Layer three is vertical. In a duplex or multilevel penthouse, the staircase void creates a continuous upward current, so the lower level loses fragrance to it and the upper level receives it. Draw each level as its own sheet and add an arrow at the void noting the direction of flow, with a line stating that the upper level is assessed after a fortnight of the lower machine running alone. More often than not it needs nothing, and specifying a second large unit at the drawing stage is how clients end up with an overdone first floor. Finally, mark the exclusions explicitly: kitchen, bathrooms, utility, terraces, balconies and the stairwell itself. A drawing that tells the client where fragrance deliberately does not go reads as a considered plan and pre-empts the instinct to fill every room later. A portion of every SOSA order supports girl-child education through Nanhi Kali.

What the drawing should carry

Annotations per zone

Zone reference, the rooms included, combined floor area, finished ceiling height, resulting volume in cubic metres, the specified device, and the proposed schedule in words — for example “Z1: living + dining + passage, 92 m² × 3.0 m = 276 m³, one Vaayu, one window 6.00–6.40 pm”.

Device positions

A marked position on an inner wall, mid-height, away from any air-conditioning return and out of the direct line between a doorway and a window or terrace door. Note the required socket and the minimum surface depth on the same tag.

Exclusion hatching

Hatch or tag the kitchen, wet areas, utility, terraces and stairwell as deliberately unscented, with one-line reasons. This is the part clients quote back to you.

A one-page handover sheet

Zone list, device per zone, position, schedule, refill interval and what to do if a room reads weak — check placement relative to the return first, then whether a door is shut, then recalculate the volume. Without this sheet the plan survives about a fortnight.

SOSA Pawan diffuser shown with the 200 ml of fragrance oil included
SOSA Pawan, ₹6,999. The device for a closed room up to about 500 sq ft — layer two of the plan.

View SOSA Pawan →

Specifying by zone type

Zone on the plan Specification
Connected public zone One SOSA Vaayu ₹12,499, or ₹12,999 hotel-inspired, up to 1,000 m³. Position on an inner wall serving the path in from the entrance.
Public zone exceeding 1,000 m³ Two units placed apart within the zone rather than one above its published figure. Note both positions and a shared schedule.
Closed room, occupied daily One SOSA Pawan ₹6,999, up to about 500 sq ft. Specify its own schedule, not the zone's.
Closed room, occupied irregularly Reed diffusers. No power, no schedule, no client maintenance. Say so on the drawing.
Dressing room with closed storage Pawan on a short window, device positioned away from the wardrobe opening, with a note that doors stay shut while it runs.
Upper level of a duplex Hold. Note “assess after 14 days of Z1 operation”. The void supplies it, and the usual outcome is reeds in secondary rooms.
Kitchen, wet areas, terraces, stairwell Hatched as deliberately excluded, with the reason — extraction, ventilation, open air, conduit.

“Every coverage figure is cubic. Almost every client conversation is in square feet. The annotation closes that gap.”

Producing the plan

  1. Mark every internal opening with its width and whether it has a door.
  2. Group doorless connections above about five or six feet into zones.
  3. Annotate each zone's volume in cubic metres, using the finished ceiling height.
  4. List closed rooms separately with an occupancy note.
  5. Draw each level on its own sheet and arrow the void.
  6. Hatch the exclusions, tag socket and surface requirements, and issue the handover sheet.

SOSA for interior designers

One machine per zone, not per room

A zoned plan usually specifies fewer devices than a client expects, and performs better than a device in every room.

SOSA Pawan ₹6,999 · SOSA Vaayu ₹12,499, ₹12,999 hotel-inspired · waterless refill oils ₹1,049 for 100 g, ₹1,849 for 300 g

View SOSA VaayuView SOSA Pawan
Where I would not spend your client's money. Not on a device per room, which is the default assumption and almost always wrong — a four-bedroom home usually justifies two. Not on a second unit for the upper level of a duplex at the drawing stage, before anyone has observed what the void delivers there. Not on anything for kitchens, wet areas, terraces or the stairwell. And not on a larger unit to compensate for a position you suspect is poor; fix the position on the drawing, where it is free.

Questions, answered

How do I zone a large apartment for home fragrance?
Group rooms joined by doorless openings of about five or six feet or more into one zone, annotate the combined volume in cubic metres using the finished ceiling height, and list rooms behind closed doors separately. Specify one device per zone rather than per room.
What should a fragrance plan actually show?
Zone references with their cubic volumes, the device specified per zone, marked positions with socket and surface requirements, the proposed schedule, and hatched exclusions for kitchen, wet areas, terraces and the stairwell. A one-page handover sheet makes it survive past the first fortnight.
Why specify in cubic metres rather than square feet?
Because coverage figures are published as volumes and ceiling height varies enormously in premium work. The same floor plan at 3.0 m and at 4.3 m are very different specifications, and nothing in the plan view reveals that.
How should I handle a duplex on the drawings?
One sheet per level, with an arrow at the staircase void noting upward flow, and a hold note on the upper level pending a fortnight of observation. The void supplies the upper floor continuously, so specifying a second large device up front commonly results in an overdone first floor.
Where should device positions be marked?
On an inner wall at mid-height, away from air-conditioning returns and out of the direct line between a doorway and a window or terrace door. Tag the socket and the minimum surface depth on the same note, because both are nearly free during the fit-out and awkward afterwards.
Should the plan include the fragrance selection?
Specify the family rather than the exact oil, and note that the final choice is best made two to three months after handover. A newly finished interior has a strong temporary baseline, and scents chosen against it tend to feel wrong once it fades.

If you would rather ask a person

Send the GA drawing and the ceiling heights

I will mark the zones, annotate the volumes and specify per zone — and tell you which rooms to leave off the plan. A portion of every SOSA order supports girl-child education through Nanhi Kali.

Write to SOSA on WhatsApp

A portion of every SOSA order supports a girl’s education through Nanhi Kali.
SOSA Home & Body, Pune · written by Sonal Sahani, founder and perfumer, trained at ISIPCA Versailles · The Founder Diaries

Prices and specifications were taken from the SOSA product pages at publication and may change; please confirm on the product page. Coverage figures are published for suitable connected spaces and depend on ceiling height, ventilation and layout. Nothing here is a health or air-purification claim.

Back to blog