SOSA Pawan diffuser in a warm ivory living room with the door closed

Where a Fragrance Zone Begins and Ends in a Ludhiana Home

SOSA · The Founder Diaries · For Interior Designers

A zone ends where a door shuts, not where the plan stops naming the room.

Enclose a verandah and a 320 square foot drawing room becomes 480 square feet of joined air — about 150 cubic metres with nothing in the middle of it that closes. The boundary is not yours to draw; it is yours to find.

Most of the Ludhiana drawings that reach me are precise about rooms and silent about doors — and the doors are the only part of the plan a fragrance specification genuinely rests on.

SOSA Pawan diffuser in a warm ivory living room with the door closed
SOSA Pawan, for one enclosed room and quoted to 500 sq ft — which is why a door that shuts, rather than a label on the plan, decides where the zone is.

View SOSA Pawan →

The answer in 30 seconds

Where a Fragrance Zone Begins and Ends in a Ludhiana Home

  • In one line. A zone is whatever a shutting door encloses, so find that line on the drawing before you choose equipment — the format label will never tell you.₹6,999
  • The test is physical. A door that shuts is a boundary. An arch, a cased opening and an open stair are not boundaries, whatever the plan calls the rooms on either side.
  • The arithmetic. A 20 ft by 16 ft drawing room with its verandah enclosed is 480 sq ft of joined air, about 150 m³, just inside one room's quote. Take in the dining room through a cased opening and it is 648 sq ft — nearly a third over that quote.
  • On an owned floor the boundary is your client's own front door, and the shared stair beyond it is outside the specification altogether.from ₹12,499
  • A terrace sits outside the boundary whatever the advertised area includes; a double-height void sits inside it. Count a 900 sq ft terrace at a notional three metres and you have added about 255 m³ that no machine can hold.
  • If you only do one thing: draw every zone boundary on the fragrance layout as a door, and annotate the door that is missing.

Ask SOSA to read a plan →

The answer, in full

A zone boundary is not a line you choose. It is a line the building already has, and the only live question on a drawing is whether you can find it — which is a harder question in Ludhiana than in apartment stock, because so much of what you are given has been altered after it was sanctioned. The test is physical and it does not care what the plan calls anything: a zone ends at a door that shuts. Walk the five formats with that test in your hand and the boundaries fall out. In a kothi, the sanctioned plan is frequently not the house. A verandah has been enclosed, a courtyard roofed, a floor added, a portion let with its own entrance; so the drawing room shown as 320 sq ft is 480 sq ft of joined air at about 150 m³, and if a cased opening also takes in the dining room it is 648 sq ft, nearly a third beyond what one room's quote covers. A portion let with its own entrance is not a further zone to add to the scheme either: it is another household's air behind a door you should leave shut and leave alone. On an owned or builder floor the boundary is the client's own front door, and the shared stair beyond it belongs to the building rather than to your client, which is a scope line as much as a fragrance one — I have written separately on fragrancing your own floor without scenting the building. In a villa or row house each constructed floor is its own zone and the stair between them is a shaft, not a room, which is why consistency across floors is a question about matching zones rather than joining them; three floors of 1,100, 1,100 and 900 sq ft sum to about 878 m³, and that sum is a trap, because it sits under a published floor-scale figure and tempts you to specify as though the house were one volume. In a penthouse the terrace is outside the boundary whatever the advertised area says and the double-height void is inside it — tall ceilings and a terrace pull in opposite directions for exactly this reason. In an apartment, one plate divided by doors, the boundary is simply wherever the doors are, and the zoning plan for large apartments and penthouses works that through at length. Having found the line, convert the room to cubic metres first and only then open a product page. A portion of every SOSA order supports a girl's education through Nanhi Kali, which is one more reason I would rather you bought the right machine once.

Specifying a boundary, format by format

Walk the plan with the door schedule, not the furniture layout.

The furniture layout tells you where people sit; the door schedule tells you what encloses them. Print the two together, mark every leaf that actually shuts, and ring each opening that does not — the arch, the cased opening, the pocket door nobody will ever close. The areas inside one ring are one zone and must be added before anything is specified, and the test is the same whether the address is off Pakhowal Road, Ferozepur Road, Sidhwan Canal Road or out towards Thakkarwal and Dad. On an altered kothi, do this on a measured survey rather than the sanctioned drawing, because the two will disagree.

Treat each constructed floor as its own zone, and the stair as a shaft.

In a villa, a row house or a kothi with a floor added above, the stair joining the floors is a vertical opening, not a room, and it will not hold a boundary. Specify floor by floor, match the fragrance rather than trying to join the floors, and resist the arithmetic that says the whole house falls within one published volume. On a builder floor the same logic stops a step earlier: the client's front door is the boundary, and the stair core beyond it is not theirs to scent.

Put the terrace and the void on opposite sides of the line.

A terrace is outside the boundary however the area was advertised, and a double-height void over the living room is inside it. Those two decisions are made in the same minute on a penthouse drawing and they go in opposite directions, so write both on the sheet. Counting a 900 sq ft terrace at a notional three metres adds about 255 m³ — roughly a quarter of a total that was otherwise honest, and enough to push a sound specification past a published figure for no reason at all.

Name the two mistakes before the sheet leaves your office.

The first is treating a cased opening as a boundary because the plan labels two rooms: the label is drawing convention, the opening is air, and the two areas are one zone. The second is treating a floor as a boundary when an open stair joins it to the floor below: that is one tall volume with two plates, and it behaves like one. Both mistakes read as reasonable on paper, and both are visible in ten seconds if you have ringed the openings.

SOSA Vaayu waterless cold-air diffuser installed in a modern reception space
SOSA Vaayu, published to 1,000 cubic metres — the floor-scale machine, for a single plate behind one front door rather than for a whole house with a stair in it.

View SOSA Vaayu →

The boundary, and what it changes

Where the line falls What goes on the sheet
Kothi, verandah enclosed One zone of 480 sq ft, about 150 m³, not a 320 sq ft room with a verandah. Survey, do not trust the sanctioned plan.
Kothi, portion let separately Outside the scope. The dividing door is the boundary and the let portion is another household's air.
Owned or builder floor The client's own front door. The shared stair and landing are excluded, and the drawing should say so.
Villa or row house Each constructed floor is a zone. The stair is a shaft; matching the fragrance replaces joining the floors.
Penthouse with terrace Terrace outside, double-height void inside. Counting the terrace adds about 255 m³ of outdoor air.
Apartment plate Wherever the doors are. An open living, dining and kitchen group of 620 sq ft is one zone, about a quarter over one room's quote.
Cased opening, two labelled rooms Not a boundary. Add the two areas and specify once for the pair.
Open stair between two floors Not a boundary. One tall volume with two plates; specify it as such or fit a door.

“The plan names rooms. Only the door schedule names zones.”

The sequence

  1. Print the plan with the door schedule beside it, and the measured survey if the house has been altered.
  2. Mark every door that genuinely shuts, then ring each opening that does not.
  3. Add the areas inside each ring; that figure, not the room name, is the zone.
  4. Convert to cubic metres using the finished ceiling height before you look at any machine.
  5. Exclude the shared stair, the terrace and any portion let with its own entrance.
  6. Annotate the missing door so the joinery package can carry a leaf if the client wants that boundary back.

SOSA · for interior designers

Find the boundary. Then specify the machine.

SOSA Pawan is the room machine: a silent waterless plug-in for one closed room, quoted to 500 sq ft, with its hours and burst lengths set over Bluetooth in the SOSA app, and supplied with 200 ml of oil as two 100 ml bottles in one of two fixed pairings. It belongs behind a door that shuts.

SOSA Vaayu is the same waterless principle at floor scale, published to 1,000 cubic metres and supplied with 400 ml of fragrance. It belongs on a single plate behind one front door — not astride a stair, and not reaching for a terrace.

SOSA Pawan ₹6,999 · SOSA Vaayu from ₹12,499, ₹12,999 hotel-inspired · waterless refill oils from ₹1,049 for 100 g, from ₹1,849 for 300 g

View SOSA PawanView SOSA Vaayu
Where I would not spend your client's money. Not on a device for a shared stair or landing your client does not own, which is the building's air and somebody else's decision. Not on a second machine for the upper landing of an open stair, because that is one volume with two plates and the second unit simply doubles up on the same air. And not on a larger machine because a terrace reads as part of the room on the brochure plan — the opening is the problem, and capacity will not close it.

Questions, answered

Where does a fragrance zone actually end in a kothi?
At the nearest door that shuts, which in an altered house is often not where the sanctioned plan suggests. An enclosed verandah or a roofed courtyard usually joins a room rather than adding one: a 320 sq ft drawing room with a 160 sq ft verandah taken in is a single zone of 480 sq ft, about 150 m³ at an eleven foot ceiling. Work from a measured survey, not the sanctioned drawing.
Is a cased opening a zone boundary?
No. A cased opening is air with architrave around it, and the plan labelling the spaces either side as two rooms is drawing convention rather than enclosure. Add the two areas and specify once for the pair. If the client wants two zones there, the honest answer is a door, not a second machine.
Can I treat a whole villa as one fragrance zone if the total volume is under the published figure?
No, and that sum is the trap. Floors of 1,100, 1,100 and 900 sq ft at a ten foot ceiling come to about 878 m³, which looks comfortable against a floor-scale published figure, but the stair joining them is a shaft and will not distribute fragrance as a room would. Specify each constructed floor as its own zone and match the fragrance between them.
Does the shared stair of a builder floor belong in the specification?
No. On an owned or builder floor the boundary is your client's own front door, and the stair core beyond it is common property shared with the other floors. Mark it excluded on the fragrance layout so nobody downstream reads the omission as an oversight.
Should a penthouse terrace be included in the scented volume?
Never, however the area was advertised. A 900 sq ft terrace counted at a notional three metres adds about 255 m³ of outdoor air — around a quarter of the figure you would then be specifying to, and enough to carry a sound plan past a published coverage limit for nothing. The double-height void over the living room is the opposite case: enclosed, and inside the boundary.
How do I zone an apartment plate where the plan labels rooms that have no doors?
By the doors, not the labels. An open living, dining and kitchen group of 620 sq ft is one zone — about a quarter more area than one room's published quote covers — while each bedroom behind its own leaf is a zone of its own. The bedrooms are usually the easy half of the job.

If you would rather ask a person

Send the plan and the door schedule

The plan alone is not enough here, and nor is the format label. Send the floor plan with the doors marked, say which openings will stay open and tell me what has been altered, and I will mark the zones and size each one. If you specify for clients regularly, ask about trade terms when you send the drawing. A portion of every SOSA order supports a girl's education through Nanhi Kali.

Write to SOSA on WhatsApp

A portion of every SOSA order supports a girl’s education through Nanhi Kali.
SOSA Home & Body, Pune · written by Sonal Sahani, founder and perfumer, trained at ISIPCA Versailles · The Founder Diaries

Prices and specifications were taken from the SOSA product pages at publication and may change; please confirm on the product page. Areas, ceiling heights and the resulting cubic figures on this page are illustrative calculations for drawing-stage planning, not measurements of any particular home, and they establish nothing about any named project or property. Published coverage applies to suitable connected spaces and depends on ceiling height, ventilation, door use and layout. Composition: naturally-derived fragrance materials on a coconut-derived carrier with non-phthalate synthetic support; alcohol-free, phthalate-free, paraben-free, IFRA-compliant. Nothing here is a health or air-purification claim.

Torna al blog