Calculate fragrance running cost from measured oil use

SOSA · The Founder Diaries · Living With It

I cannot tell you what it costs.
You can measure it in a fortnight.

This is the question I am asked most often and answer least willingly, because every honest answer to it is yours rather than mine. Consumption depends on your model, your setting, your schedule and your rooms. What I can give you is a method that produces your own figure, and a warning about anybody who gives you theirs.

Any number quoted to you for monthly oil use was measured in somebody else's house, on somebody else's schedule. Measure yours. It takes a fortnight and a kitchen scale.

The SOSA Vaayu opened, showing the refillable tank
वायु Vaayu takes a refillable bottle; the oil sets listed for the model, and their sizes, are on its product page. Tap to see it.

One of the SOSA guides to living with a device. When the figure is in hand, read how to choose and replace the correct refill, and if the number came out higher than you expected, how to set a comfortable strength is usually where the saving is.

The answer in 30 seconds

Weigh, wait a fortnight, weigh again

  • Nobody can quote you a monthly figure. Not your supplier, not a review, not me. Consumption follows the model, the setting, the schedule and the room, and all four of those are yours.
  • Measure a fraction of a bottle, not millilitres. A kitchen scale and a fortnight of your ordinary schedule will tell you what share of one bottle your house actually uses.
  • Keep the schedule still while you measure. Do not change the setting, the windows or the position during the measuring period, or the figure measures nothing.
  • Separate operating time from clock time. A timer window is a period during which the machine is permitted to run. What it does inside that window is set by your model, so read its manual.
  • Then multiply by the price on the page. Take the refill price from the product page on the day you order. That is the only price figure in this calculation, and it is never one I will print here.

See वायु Vaayu →

Why I will not give you a number

Because the number does not exist independently of your house, and quoting one would be the most useful dishonest thing I could do. Oil use follows the intensity you have chosen, how many windows run and for how long, how many days a week the house is occupied, the volume of the space, how much of it is open to other spaces, how hard the air conditioning is working and which family the oil belongs to. Change the setting by one step and the figure moves. Shut a door that used to stand open and it moves again. Go away for a fortnight in May and the month's figure is meaningless. Two households with the same machine and the same oil can land on figures that are nowhere near each other without either of them doing a single thing wrong. So rather than a figure, here is the arithmetic, which is short, and the measurement, which is one fortnight of doing nothing differently.

The measurement, in four moves

First, find the weight of a whole bottle's contents, because that is the quantity you will later be paying for. Weigh a new, unopened refill on a kitchen scale and write the figure down. Keep that bottle until it is genuinely empty, weigh it again, and the difference between the two is the net weight of one bottle's worth of oil. Call that C. You only ever have to do this once per size you buy, and doing it in weight rather than in millilitres spares you every argument about density, meniscus and what a half-full bottle looks like from the side.

Second, start the clock properly. Fit the bottle you are going to measure, weigh it in place or weigh it immediately before fitting, and record four things in the same note: the weight, call it W1, the date, the intensity setting, and the timer windows exactly as you have set them, including which days they run on. That note is the whole value of the exercise. A measurement without the setting written beside it tells you nothing you can reuse.

Third, change nothing for a fortnight. Not the setting, not the window length, not the position, not the door you leave open. A fortnight is the shortest period I would trust, because it contains two weekends and most households run differently on a Sunday, and if your occupancy swings seasonally then measure again in the other season rather than assuming. Fourth, at the end of the period, weigh the bottle again. That is W2, and the number of days you ran is D. You now have everything.

Your own worksheet
C Net weight of one full bottle's contents. A new bottle weighed, minus the same bottle weighed empty. Once per size.
W1 Weight of the bottle at the start of the measuring period, with the date, the setting and the windows written beside it.
W2 Weight of the same bottle at the end, having changed nothing in between.
D Days the machine actually ran your schedule. Subtract the days the house was empty or the device was off.
(W1 − W2) ÷ C The share of one bottle your house used in that period. This is your figure, and it belongs to that setting and that schedule only.
÷ D × 30 Your share of a bottle per month at this setting. Multiply by the refill price shown on the product page on the day you order to get a monthly cost.

Written out: subtract W2 from W1 to get the weight you used; divide by C to express it as a share of one bottle; divide by D for a daily share; multiply by thirty for a monthly share; and multiply that by whatever the refill costs on its product page on the day you order it. Every one of those five numbers is yours except the last, and the last is the only one I decline to print, because prices change and a page that quoted one would mislead somebody next quarter. If you would rather think in operating hours than in days, divide the weight you used by the operating hours you can account for from your own timer settings, and keep in mind that a timer window is a period during which the machine is permitted to run rather than a guarantee of continuous output: what happens inside the window is a property of your model, so read its manual and test your own unit rather than taking a ratio from an article, mine included.

“Every figure in this calculation is yours except the price, and the price is the only one I will not print.”

What moves the number, in rough order

The intensity setting moves it most, which is why the first thing to do with an uncomfortable running cost is to go back to the lowest step and run a shorter window rather than to shop for a cheaper oil. Window length and frequency come next, and are the easiest saving in the whole category: two short windows ending just before the rooms are used will generally give a household the scent it wanted at a fraction of continuous running, because what people enjoy is the trace rather than the production. Then volume, since a larger connected space asks for more than a single shut room does. Then occupancy: a timer window that runs while the flat is empty is the purest waste in this business, and if your home is used intermittently, there is a guide for that. Then the family, because the heavier directions tend to be run lower, which cuts both ways. Season and air conditioning sit underneath all of it, and are the reason I ask people to measure twice a year rather than once.

Two things that do not move the number, and are worth knowing before you budget for them. Neither machine holds a battery, and the app connects over Bluetooth within range inside the home rather than over the internet, so there is no standby service, no remote session and nothing of that sort to account for: the machine runs when there is mains power at the socket and your timer says so. And once you have your own share-of-a-bottle figure, choosing a refill size becomes arithmetic rather than guesswork. Decide how often you are willing to reorder, multiply your monthly share by that many months, and buy the listed size that covers it. Where a model's page lists more than one size, that is the decision the sizes exist for.

For your interior designer: budgeting a scheme honestly

Clients ask for a running cost at the proposal stage, before a single machine has been switched on, and the temptation to supply a confident figure is considerable. Resist it; a measured figure handed over in month two is worth more than a guess in week one, and it will not be held against you later.

  1. Quote the method, not a monthly figure. Write into the proposal that oil use will be measured on site over a fortnight at the approved setting, and budgeted from that.
  2. Record the approved setting as a specification item. Intensity, window length and days, per zone, with the date. The running cost is a property of that setting, not of the machine.
  3. Measure each zone separately. A shut study and an open living volume will not share a figure. One bottle, one zone, one note.
  4. Hand over the worksheet, not just the total. C, W1, W2 and D, with the setting beside them, so the household can repeat the measurement when the schedule changes.
  5. Re-measure after any change. A new setting, a new door habit, a new season or a second machine makes the old figure historic. Say so in the handover note.

वायु and पवन · local controls

Local timers, so the running cost is a decision

वायु Vaayu: SOSA app over Bluetooth and onboard buttons · run windows on a timer, on chosen days · key-lock · power adapter included · published for up to 1,000 m³ of a suitable connected zone.

पवन Pawan: SOSA app and timer · plugs straight into the wall socket with no cable, adapter or battery · one room up to about 500 sq ft · silent.

Current prices and oil sets are on each product page.

See वायु VaayuSee पवन Pawan
Where I would not spend your money. Not on a larger refill chosen from a figure in an article, including a figure anybody quotes from one of mine. Not on a cheaper oil to bring a monthly cost down, when going back to the lowest setting and shortening the window would have brought it down further and improved the room at the same time. Not on running a window in an empty flat because the timer was convenient to set that way. Not on a second machine for an adjoining space before you have measured what the first one actually uses. And not on any of it before the fortnight, because a budget built on a guess is the thing that makes people resent a purchase they were happy with.

Questions, answered

How much oil will my diffuser use each month?
I cannot tell you, and nor can anybody who has not been in your house. Weigh a bottle, run your ordinary schedule for a fortnight without changing anything, weigh it again, and express the difference as a share of one full bottle's contents. Divide by the days you ran, multiply by thirty, and multiply by the refill price on the product page on the day you order.
Why will you not just publish a consumption figure?
Because it would be a figure from one setting, one schedule, one volume and one season, and it would be read as a prediction for every house. Consumption follows the model, the intensity, the windows, the occupancy and the room. A published average would save you five minutes and cost you an accurate refill budget.
Is a timer window the same as running time?
No, and this is the commonest error in these calculations. A timer window is a period during which the machine is permitted to run. What the machine does within that window belongs to the model you own, so read its manual and test your own unit. Measure against the schedule as you have actually set it, and re-measure if you change it.
Can I measure in millilitres instead of weight?
You can mark the level on the bottle and work in rough fractions, and for many households that is accurate enough to choose a refill size. Weight is better, because a kitchen scale reads to a gram and a bottle wall does not, and because expressing your use as a share of one whole bottle's contents removes every conversion from the sum.
Which refill size should I buy?
Once you have your monthly share of a bottle, decide how often you want to reorder and multiply. Then buy the listed size on the product page for the model you own that covers that period. Where a page lists more than one size, that is precisely the choice the sizes are there for, and no size has a life I can state for you.

Continue in the SOSA guides

If you would rather ask a person

Send us your fortnight

Give us C, W1, W2 and D, with the setting and the windows you ran, and we will check the arithmetic with you and say which listed refill size suits the figure you have measured.

Write to SOSA on WhatsApp

A portion of every SOSA order supports a girl's education through Nanhi Kali.
SOSA Home & Body, Pune · written by Sonal Sahani · The Founder Diaries

Specifications were taken from the SOSA product pages at publication and may change; current prices and oil sets are on the product pages. Published coverage figures describe a suitable space under the manufacturer's conditions and are not a guarantee for any particular home; size your own enclosed volume from a measured plan. No automatic restart, backup power, unattended operation or internet control is claimed; the SOSA app works over Bluetooth within range of the device, and the behaviour of your own unit should be checked in its manual and tested. Use only the refill listed as compatible with the model you own, and follow the manufacturer's placement, clearance and cleaning instructions, including the requirement for a suitable dry location. Oil consumption depends on the model, setting, schedule and room; figures quoted by any source are not a prediction for your home. Measure your own use before planning a refill budget. Electrical work is for a qualified electrician. SOSA compositions use naturally-derived fragrance materials on a coconut-derived carrier with non-phthalate synthetic support; they are alcohol-free, phthalate-free, paraben-free and IFRA-compliant. Fragrance is ambience: it is not a substitute for ventilation, extraction or cleaning, it does not remove an odour at its source, and a diffuser does not purify air.

Zurück zum Blog